Цифровые контроллеры температуры серии CTH и CTD Crouzet

89421102 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD) Технические характеристики 89421102 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD): Supply 100 to 240 VAC
Frequency (Hz) 50 / 60
Tolerance -15 % +10 % Un
Consumption 5 VA
Display CTD 43 Measurement or setpoint : red LEDs, 3-digit, 7-segment, height 10 mm
Display CTH 47 / CTD 46 Measurement : red LEDs, 3-digit, 7-segment, height 10 mm
Setpoint : green LEDs, 3-digit, 7-segment, height 7,5 mm
Switch the configuration and calibration are accessed via an internal switch, which can only be accessed when the equipment is
disconnected
Insulation resistance conforming to IEC 348 > 100 MΩ
Insulation voltage according to IEC 348 1500 V
Immunity to interference conforming to IEC 801-4 Level 3
Immunity to interference conforming to IEC 801-2 8000 V
Accuracy ± 0.3 % of the full measurement scale at an ambient temperature of 25 oC at Un
Operating temperature range (°C) 0 →+50 °C
Storage temperature range (°C) -30 →+70 °C
Relative humidity (Rh no condensation) 20 →85 %
Housing material self-extinguishing UL94 VO grade
Front panel polycarbonate membrane
Protection class according to IEC 529 (IEC 70-1) IP 54
Connection screw terminals
Weight (g) 160
Approvals UL/CSA
Inputs
Thermocouples J, K, and N IEC 584-1
Thermocouples L DIN 43710
Reference junction Automatic cold junction compesation : 0 to 50 oC (Thermocouples)
Reference junction drift 0,1 °C / °C
Line resistance 100 Ω max
Calibration (IEC 584-1) IEC 584 — 1
Resist. temp. detector Pt 100 according to IEC 751 3-wire
Line resistance < 4 Ω
Input type and standard range TC L (0/800 °C) (0/999°F)
J (0/800 °C) (0/999°F)
K (0/999 °C) (0/999°F)
N (0/999 °C) (0/999°F)
Input types and standard rangeRTD Pt100 (-199/500 °C) (-19,9/99,9°F) (-199/999 °C)
Output
Type of output discontinuous
Action type CTH 46 heating-cooling
Action type CTD 43 — CTD 46 heating or cooling
Limitation of output power : SOFT-START- heat action adjustable from 0 to 100 %
Limitation of output power : SOFT-START-heat/cool
action adjustable from -100 to + 100 %
Main output changeover relay 3 A 250 V AC resistive
Main output—logic Max. load : 700 Ω
Level 0 : < 0,5 V DC
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
18/06/2013 www.crouzet.comLevel 1 :
14 V DC± 20 % @ 20 mA max
24 V DC± 20 % @ 1 mA max
Main output cycle time 1 s →200 s
Cool output CTH 46 only N/O-1 A contact, 250 V AC resistive
Alarm output CTD 43-CTD 46 only N/O-1 A contact, 250 V AC resistive
Control characteristics
Control algorithm PID with auto-tune and adaptive tune : SMART
Control type CTD 43 CTD 46 heating or cooling
Control type CTH 46 heating-cooling
Sampling time 500 ms
Proportional band Pb CTD 43 — CTD 46 1,0 % to 99,9 % of scale amplitude
Proportional band Pb CTH 46 1,5 % to 99,9 % of scale amplitude
Proportional band Pb
Note : if Pb = 0 % discrete action
Hysteresis (during discrete action) 0,1 % to 10 % of scale amplitude
Integral time ti
Note : if ti > 20 min 1 min 20 s to 20 min 0 s (10 s resolution)
Derivative time td.
Note : if td=0 1 s to 9 min 59 s
Cycle time heating 1 s →200 s
Cycle time cooling (CTH46 only) 1 s →200 s
Heat-cool control CTH 46
Cool proportional band rC x heat proportional band
Heat-cool control
rC : relative gain 0,20 →1,00
Heat-cool control CTH 46
dead.overlap band -20 % to + 50 % of the heat proportional band
Alarms (on CTD 43 and CTD 46 only)
Type of output direct or reverse
Functions absolute alarm
. band alarm
. deviation alarm
Reset to zero manual
Inhibition can be configured
Alarm threshold — absolute alarm absolute value independent from SP
Alarm threshold — band alarm value relative to SP, adjustable from 0 to 500 °C/°F
Alarm threshold — deviation alarm value relative to SP, adjustable from-199 °C/°F (negative deviation) to +500 °C/°F (positive deviation)
Alarm 0.1 to 10 % of scale amplitude                                                                            . Производитель: Crouzet. Сроки поставки 3-4 недели. Мин заказ 1 шт.		 Crouzet Заказать можно по тел.: (375) 29 640-15-23
Написав по e-mail: vasiliy.hotovchik@gmail.com
89421108 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD) Технические характеристики 89421108 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD): Supply 100 to 240 VAC
Frequency (Hz) 50 / 60
Tolerance -15 % +10 % Un
Consumption 5 VA
Display CTD 43 Measurement or setpoint : red LEDs, 3-digit, 7-segment, height 10 mm
Display CTH 47 / CTD 46 Measurement : red LEDs, 3-digit, 7-segment, height 10 mm
Setpoint : green LEDs, 3-digit, 7-segment, height 7,5 mm
Switch the configuration and calibration are accessed via an internal switch, which can only be accessed when the equipment is
disconnected
Insulation resistance conforming to IEC 348 > 100 MΩ
Insulation voltage according to IEC 348 1500 V
Immunity to interference conforming to IEC 801-4 Level 3
Immunity to interference conforming to IEC 801-2 8000 V
Accuracy ± 0.3 % of the full measurement scale at an ambient temperature of 25 oC at Un
Operating temperature range (°C) 0 →+50 °C
Storage temperature range (°C) -30 →+70 °C
Relative humidity (Rh no condensation) 20 →85 %
Housing material self-extinguishing UL94 VO grade
Front panel polycarbonate membrane
Protection class according to IEC 529 (IEC 70-1) IP 54
Connection screw terminals
Weight (g) 160
Approvals UL/CSA
Inputs
Thermocouples J, K, and N IEC 584-1
Thermocouples L DIN 43710
Reference junction Automatic cold junction compesation : 0 to 50 oC (Thermocouples)
Reference junction drift 0,1 °C / °C
Line resistance 100 Ω max
Calibration (IEC 584-1) IEC 584 — 1
Resist. temp. detector Pt 100 according to IEC 751 3-wire
Line resistance < 4 Ω
Input type and standard range TC L (0/800 °C) (0/999°F)
J (0/800 °C) (0/999°F)
K (0/999 °C) (0/999°F)
N (0/999 °C) (0/999°F)
Input types and standard rangeRTD Pt100 (-199/500 °C) (-19,9/99,9°F) (-199/999 °C)
Output
Type of output discontinuous
Action type CTH 46 heating-cooling
Action type CTD 43 — CTD 46 heating or cooling
Limitation of output power : SOFT-START- heat action adjustable from 0 to 100 %
Limitation of output power : SOFT-START-heat/cool
action adjustable from -100 to + 100 %
Main output changeover relay 3 A 250 V AC resistive
Main output—logic Max. load : 700 Ω
Level 0 : < 0,5 V DC
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
18/06/2013 www.crouzet.comLevel 1 :
14 V DC± 20 % @ 20 mA max
24 V DC± 20 % @ 1 mA max
Main output cycle time 1 s →200 s
Cool output CTH 46 only N/O-1 A contact, 250 V AC resistive
Alarm output CTD 43-CTD 46 only N/O-1 A contact, 250 V AC resistive
Control characteristics
Control algorithm PID with auto-tune and adaptive tune : SMART
Control type CTD 43 CTD 46 heating or cooling
Control type CTH 46 heating-cooling
Sampling time 500 ms
Proportional band Pb CTD 43 — CTD 46 1,0 % to 99,9 % of scale amplitude
Proportional band Pb CTH 46 1,5 % to 99,9 % of scale amplitude
Proportional band Pb
Note : if Pb = 0 % discrete action
Hysteresis (during discrete action) 0,1 % to 10 % of scale amplitude
Integral time ti
Note : if ti > 20 min 1 min 20 s to 20 min 0 s (10 s resolution)
Derivative time td.
Note : if td=0 1 s to 9 min 59 s
Cycle time heating 1 s →200 s
Cycle time cooling (CTH46 only) 1 s →200 s
Heat-cool control CTH 46
Cool proportional band rC x heat proportional band
Heat-cool control
rC : relative gain 0,20 →1,00
Heat-cool control CTH 46
dead.overlap band -20 % to + 50 % of the heat proportional band
Alarms (on CTD 43 and CTD 46 only)
Type of output direct or reverse
Functions absolute alarm
. band alarm
. deviation alarm
Reset to zero manual
Inhibition can be configured
Alarm threshold — absolute alarm absolute value independent from SP
Alarm threshold — band alarm value relative to SP, adjustable from 0 to 500 °C/°F
Alarm threshold — deviation alarm value relative to SP, adjustable from-199 °C/°F (negative deviation) to +500 °C/°F (positive deviation)
Alarm 0.1 to 10 % of scale amplitude                                                                            . Производитель: Crouzet. Сроки поставки 3-4 недели. Мин заказ 1 шт.		 Crouzet Заказать можно по тел.: (375) 29 640-15-23
Написав по e-mail: vasiliy.hotovchik@gmail.com
89421112 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD) Технические характеристики 89421112 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD): Supply 100 to 240 VAC
Frequency (Hz) 50 / 60
Tolerance -15 % +10 % Un
Consumption 5 VA
Display CTD 43 Measurement or setpoint : red LEDs, 3-digit, 7-segment, height 10 mm
Display CTH 47 / CTD 46 Measurement : red LEDs, 3-digit, 7-segment, height 10 mm
Setpoint : green LEDs, 3-digit, 7-segment, height 7,5 mm
Switch the configuration and calibration are accessed via an internal switch, which can only be accessed when the equipment is
disconnected
Insulation resistance conforming to IEC 348 > 100 MΩ
Insulation voltage according to IEC 348 1500 V
Immunity to interference conforming to IEC 801-4 Level 3
Immunity to interference conforming to IEC 801-2 8000 V
Accuracy ± 0.3 % of the full measurement scale at an ambient temperature of 25 oC at Un
Operating temperature range (°C) 0 →+50 °C
Storage temperature range (°C) -30 →+70 °C
Relative humidity (Rh no condensation) 20 →85 %
Housing material self-extinguishing UL94 VO grade
Front panel polycarbonate membrane
Protection class according to IEC 529 (IEC 70-1) IP 54
Connection screw terminals
Weight (g) 160
Approvals UL/CSA
Inputs
Thermocouples J, K, and N IEC 584-1
Thermocouples L DIN 43710
Reference junction Automatic cold junction compesation : 0 to 50 oC (Thermocouples)
Reference junction drift 0,1 °C / °C
Line resistance 100 Ω max
Calibration (IEC 584-1) IEC 584 — 1
Resist. temp. detector Pt 100 according to IEC 751 3-wire
Line resistance < 4 Ω
Input type and standard range TC L (0/800 °C) (0/999°F)
J (0/800 °C) (0/999°F)
K (0/999 °C) (0/999°F)
N (0/999 °C) (0/999°F)
Input types and standard rangeRTD Pt100 (-199/500 °C) (-19,9/99,9°F) (-199/999 °C)
Output
Type of output discontinuous
Action type CTH 46 heating-cooling
Action type CTD 43 — CTD 46 heating or cooling
Limitation of output power : SOFT-START- heat action adjustable from 0 to 100 %
Limitation of output power : SOFT-START-heat/cool
action adjustable from -100 to + 100 %
Main output changeover relay 3 A 250 V AC resistive
Main output—logic Max. load : 700 Ω
Level 0 : < 0,5 V DC
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
18/06/2013 www.crouzet.comLevel 1 :
14 V DC± 20 % @ 20 mA max
24 V DC± 20 % @ 1 mA max
Main output cycle time 1 s →200 s
Cool output CTH 46 only N/O-1 A contact, 250 V AC resistive
Alarm output CTD 43-CTD 46 only N/O-1 A contact, 250 V AC resistive
Control characteristics
Control algorithm PID with auto-tune and adaptive tune : SMART
Control type CTD 43 CTD 46 heating or cooling
Control type CTH 46 heating-cooling
Sampling time 500 ms
Proportional band Pb CTD 43 — CTD 46 1,0 % to 99,9 % of scale amplitude
Proportional band Pb CTH 46 1,5 % to 99,9 % of scale amplitude
Proportional band Pb
Note : if Pb = 0 % discrete action
Hysteresis (during discrete action) 0,1 % to 10 % of scale amplitude
Integral time ti
Note : if ti > 20 min 1 min 20 s to 20 min 0 s (10 s resolution)
Derivative time td.
Note : if td=0 1 s to 9 min 59 s
Cycle time heating 1 s →200 s
Cycle time cooling (CTH46 only) 1 s →200 s
Heat-cool control CTH 46
Cool proportional band rC x heat proportional band
Heat-cool control
rC : relative gain 0,20 →1,00
Heat-cool control CTH 46
dead.overlap band -20 % to + 50 % of the heat proportional band
Alarms (on CTD 43 and CTD 46 only)
Type of output direct or reverse
Functions absolute alarm
. band alarm
. deviation alarm
Reset to zero manual
Inhibition can be configured
Alarm threshold — absolute alarm absolute value independent from SP
Alarm threshold — band alarm value relative to SP, adjustable from 0 to 500 °C/°F
Alarm threshold — deviation alarm value relative to SP, adjustable from-199 °C/°F (negative deviation) to +500 °C/°F (positive deviation)
Alarm 0.1 to 10 % of scale amplitude                                                                          . Производитель: Crouzet. Сроки поставки 3-4 недели. Мин заказ 1 шт.		 Crouzet Заказать можно по тел.: (375) 29 640-15-23
Написав по e-mail: vasiliy.hotovchik@gmail.com
89421118 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD) Технические характеристики 89421118 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD): TOTALIZER DISPLAY PANEL
No. of Digits / Alpha: 3
Digit Height: 10mm
Panel Cutout Height: 45mm
Panel Cutout Width: 45mm
IP / NEMA Rating: NEMA 4X
Leaded Process Compatible: No
Peak Reflow Compatible (260 C): No
RoHS Compliant: No                                                                            . Производитель: Crouzet. Сроки поставки 3-4 недели. Мин заказ 1 шт.		 Crouzet Заказать можно по тел.: (375) 29 640-15-23
Написав по e-mail: vasiliy.hotovchik@gmail.com
89422102 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD) Технические характеристики 89422102 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD): Supply 100 to 240 VAC
Frequency (Hz) 50 / 60
Tolerance -15 % +10 % Un
Consumption 5 VA
Display CTD 43 Measurement or setpoint : red LEDs, 3-digit, 7-segment, height 10 mm
Display CTH 47 / CTD 46 Measurement : red LEDs, 3-digit, 7-segment, height 10 mm
Setpoint : green LEDs, 3-digit, 7-segment, height 7,5 mm
Switch the configuration and calibration are accessed via an internal switch, which can only be accessed when the equipment is
disconnected
Insulation resistance conforming to IEC 348 > 100 MΩ
Insulation voltage according to IEC 348 1500 V
Immunity to interference conforming to IEC 801-4 Level 3
Immunity to interference conforming to IEC 801-2 8000 V
Accuracy ± 0.3 % of the full measurement scale at an ambient temperature of 25 oC at Un
Operating temperature range (°C) 0 →+50 °C
Storage temperature range (°C) -30 →+70 °C
Relative humidity (Rh no condensation) 20 →85 %
Housing material self-extinguishing UL94 VO grade
Front panel polycarbonate membrane
Protection class according to IEC 529 (IEC 70-1) IP 54
Connection screw terminals
Weight (g) 160
Approvals UL/CSA
Inputs
Thermocouples J, K, and N IEC 584-1
Thermocouples L DIN 43710
Reference junction Automatic cold junction compesation : 0 to 50 oC (Thermocouples)
Reference junction drift 0,1 °C / °C
Line resistance 100 Ω max
Calibration (IEC 584-1) IEC 584 — 1
Resist. temp. detector Pt 100 according to IEC 751 3-wire
Line resistance < 4 Ω
Input type and standard range TC L (0/800 °C) (0/999°F)
J (0/800 °C) (0/999°F)
K (0/999 °C) (0/999°F)
N (0/999 °C) (0/999°F)
Input types and standard rangeRTD Pt100 (-199/500 °C) (-19,9/99,9°F) (-199/999 °C)
Output
Type of output discontinuous
Action type CTH 46 heating-cooling
Action type CTD 43 — CTD 46 heating or cooling
Limitation of output power : SOFT-START- heat action adjustable from 0 to 100 %
Limitation of output power : SOFT-START-heat/cool
action adjustable from -100 to + 100 %
Main output changeover relay 3 A 250 V AC resistive
Main output—logic Max. load : 700 Ω
Level 0 : < 0,5 V DC                                                                          . Производитель: Crouzet. Сроки поставки 3-4 недели. Мин заказ 1 шт.		 Crouzet Заказать можно по тел.: (375) 29 640-15-23
Написав по e-mail: vasiliy.hotovchik@gmail.com
89422108 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD) Технические характеристики 89422108 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD): Supply 100 to 240 VAC
Frequency (Hz) 50 / 60
Tolerance -15 % +10 % Un
Consumption 5 VA
Display CTD 43 Measurement or setpoint : red LEDs, 3-digit, 7-segment, height 10 mm
Display CTH 47 / CTD 46 Measurement : red LEDs, 3-digit, 7-segment, height 10 mm
Setpoint : green LEDs, 3-digit, 7-segment, height 7,5 mm
Switch the configuration and calibration are accessed via an internal switch, which can only be accessed when the equipment is
disconnected
Insulation resistance conforming to IEC 348 > 100 MΩ
Insulation voltage according to IEC 348 1500 V
Immunity to interference conforming to IEC 801-4 Level 3
Immunity to interference conforming to IEC 801-2 8000 V
Accuracy ± 0.3 % of the full measurement scale at an ambient temperature of 25 oC at Un
Operating temperature range (°C) 0 →+50 °C
Storage temperature range (°C) -30 →+70 °C
Relative humidity (Rh no condensation) 20 →85 %
Housing material self-extinguishing UL94 VO grade
Front panel polycarbonate membrane
Protection class according to IEC 529 (IEC 70-1) IP 54
Connection screw terminals
Weight (g) 160
Approvals UL/CSA
Inputs
Thermocouples J, K, and N IEC 584-1
Thermocouples L DIN 43710
Reference junction Automatic cold junction compesation : 0 to 50 oC (Thermocouples)
Reference junction drift 0,1 °C / °C
Line resistance 100 Ω max
Calibration (IEC 584-1) IEC 584 — 1
Resist. temp. detector Pt 100 according to IEC 751 3-wire
Line resistance < 4 Ω
Input type and standard range TC L (0/800 °C) (0/999°F)
J (0/800 °C) (0/999°F)
K (0/999 °C) (0/999°F)
N (0/999 °C) (0/999°F)
Input types and standard rangeRTD Pt100 (-199/500 °C) (-19,9/99,9°F) (-199/999 °C)
Output
Type of output discontinuous
Action type CTH 46 heating-cooling
Action type CTD 43 — CTD 46 heating or cooling
Limitation of output power : SOFT-START- heat action adjustable from 0 to 100 %
Limitation of output power : SOFT-START-heat/cool
action adjustable from -100 to + 100 %
Main output changeover relay 3 A 250 V AC resistive
Main output—logic Max. load : 700 Ω
Level 0 : < 0,5 V DC
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
18/06/2013 www.crouzet.comLevel 1 :
14 V DC± 20 % @ 20 mA max
24 V DC± 20 % @ 1 mA max
Main output cycle time 1 s →200 s
Cool output CTH 46 only N/O-1 A contact, 250 V AC resistive
Alarm output CTD 43-CTD 46 only N/O-1 A contact, 250 V AC resistive
Control characteristics
Control algorithm PID with auto-tune and adaptive tune : SMART
Control type CTD 43 CTD 46 heating or cooling
Control type CTH 46 heating-cooling
Sampling time 500 ms
Proportional band Pb CTD 43 — CTD 46 1,0 % to 99,9 % of scale amplitude
Proportional band Pb CTH 46 1,5 % to 99,9 % of scale amplitude
Proportional band Pb
Note : if Pb = 0 % discrete action
Hysteresis (during discrete action) 0,1 % to 10 % of scale amplitude
Integral time ti
Note : if ti > 20 min 1 min 20 s to 20 min 0 s (10 s resolution)
Derivative time td.
Note : if td=0 1 s to 9 min 59 s
Cycle time heating 1 s →200 s
Cycle time cooling (CTH46 only) 1 s →200 s
Heat-cool control CTH 46
Cool proportional band rC x heat proportional band
Heat-cool control
rC : relative gain 0,20 →1,00
Heat-cool control CTH 46
dead.overlap band -20 % to + 50 % of the heat proportional band
Alarms (on CTD 43 and CTD 46 only)
Type of output direct or reverse
Functions absolute alarm
. band alarm
. deviation alarm
Reset to zero manual
Inhibition can be configured
Alarm threshold — absolute alarm absolute value independent from SP
Alarm threshold — band alarm value relative to SP, adjustable from 0 to 500 °C/°F
Alarm threshold — deviation alarm value relative to SP, adjustable from-199 °C/°F (negative deviation) to +500 °C/°F (positive deviation)
Alarm 0.1 to 10 % of scale amplitude                                                                           . Производитель: Crouzet. Сроки поставки 3-4 недели. Мин заказ 1 шт.		 Crouzet Заказать можно по тел.: (375) 29 640-15-23
Написав по e-mail: vasiliy.hotovchik@gmail.com
89422112 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD) Технические характеристики 89422112 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD): CTH 46
Heating / cooling function
Measurement and setpoint display
CTD 43
Heating or cooling function
Measurement display
Measurement deviation display-Setpoint via LED
1 configurable alarm
CTD 46
Heating or cooling function
Measurement and setpoint display
1 configurable alarm                                                                           . Производитель: Crouzet. Сроки поставки 3-4 недели. Мин заказ 1 шт.		 Crouzet Заказать можно по тел.: (375) 29 640-15-23
Написав по e-mail: vasiliy.hotovchik@gmail.com
89422118 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD) Технические характеристики 89422118 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD): CTH 46
Heating / cooling function
Measurement and setpoint display
CTD 43
Heating or cooling function
Measurement display
Measurement deviation display-Setpoint via LED
1 configurable alarm
CTD 46
Heating or cooling function
Measurement and setpoint display
1 configurable alarm                                                                          . Производитель: Crouzet. Сроки поставки 3-4 недели. Мин заказ 1 шт.		 Crouzet Заказать можно по тел.: (375) 29 640-15-23
Написав по e-mail: vasiliy.hotovchik@gmail.com
89422502 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD) Технические характеристики 89422502 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD): Supply 100 to 240 VAC
Frequency (Hz) 50 / 60
Tolerance -15 % +10 % Un
Consumption 5 VA
Display CTD 43 Measurement or setpoint : red LEDs, 3-digit, 7-segment, height 10 mm
Display CTH 47 / CTD 46 Measurement : red LEDs, 3-digit, 7-segment, height 10 mm
Setpoint : green LEDs, 3-digit, 7-segment, height 7,5 mm
Switch the configuration and calibration are accessed via an internal switch, which can only be accessed when the equipment is
disconnected
Insulation resistance conforming to IEC 348 > 100 MΩ
Insulation voltage according to IEC 348 1500 V
Immunity to interference conforming to IEC 801-4 Level 3
Immunity to interference conforming to IEC 801-2 8000 V
Accuracy ± 0.3 % of the full measurement scale at an ambient temperature of 25 oC at Un
Operating temperature range (°C) 0 →+50 °C
Storage temperature range (°C) -30 →+70 °C
Relative humidity (Rh no condensation) 20 →85 %
Housing material self-extinguishing UL94 VO grade
Front panel polycarbonate membrane
Protection class according to IEC 529 (IEC 70-1) IP 54
Connection screw terminals
Weight (g) 160
Approvals UL/CSA
Inputs
Thermocouples J, K, and N IEC 584-1
Thermocouples L DIN 43710
Reference junction Automatic cold junction compesation : 0 to 50 oC (Thermocouples)
Reference junction drift 0,1 °C / °C
Line resistance 100 Ω max
Calibration (IEC 584-1) IEC 584 — 1
Resist. temp. detector Pt 100 according to IEC 751 3-wire
Line resistance < 4 Ω
Input type and standard range TC L (0/800 °C) (0/999°F)
J (0/800 °C) (0/999°F)
K (0/999 °C) (0/999°F)
N (0/999 °C) (0/999°F)
Input types and standard rangeRTD Pt100 (-199/500 °C) (-19,9/99,9°F) (-199/999 °C)
Output
Type of output discontinuous
Action type CTH 46 heating-cooling
Action type CTD 43 — CTD 46 heating or cooling
Limitation of output power : SOFT-START- heat action adjustable from 0 to 100 %
Limitation of output power : SOFT-START-heat/cool
action adjustable from -100 to + 100 %
Main output changeover relay 3 A 250 V AC resistive
Main output—logic Max. load : 700 Ω
Level 0 : < 0,5 V DC
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
18/06/2013 www.crouzet.comLevel 1 :
14 V DC± 20 % @ 20 mA max
24 V DC± 20 % @ 1 mA max
Main output cycle time 1 s →200 s
Cool output CTH 46 only N/O-1 A contact, 250 V AC resistive
Alarm output CTD 43-CTD 46 only N/O-1 A contact, 250 V AC resistive
Control characteristics
Control algorithm PID with auto-tune and adaptive tune : SMART
Control type CTD 43 CTD 46 heating or cooling
Control type CTH 46 heating-cooling
Sampling time 500 ms
Proportional band Pb CTD 43 — CTD 46 1,0 % to 99,9 % of scale amplitude
Proportional band Pb CTH 46 1,5 % to 99,9 % of scale amplitude
Proportional band Pb
Note : if Pb = 0 % discrete action
Hysteresis (during discrete action) 0,1 % to 10 % of scale amplitude
Integral time ti
Note : if ti > 20 min 1 min 20 s to 20 min 0 s (10 s resolution)
Derivative time td.
Note : if td=0 1 s to 9 min 59 s
Cycle time heating 1 s →200 s
Cycle time cooling (CTH46 only) 1 s →200 s
Heat-cool control CTH 46
Cool proportional band rC x heat proportional band
Heat-cool control
rC : relative gain 0,20 →1,00
Heat-cool control CTH 46
dead.overlap band -20 % to + 50 % of the heat proportional band
Alarms (on CTD 43 and CTD 46 only)
Type of output direct or reverse
Functions absolute alarm
. band alarm
. deviation alarm
Reset to zero manual
Inhibition can be configured
Alarm threshold — absolute alarm absolute value independent from SP
Alarm threshold — band alarm value relative to SP, adjustable from 0 to 500 °C/°F
Alarm threshold — deviation alarm value relative to SP, adjustable from-199 °C/°F (negative deviation) to +500 °C/°F (positive deviation)
Alarm 0.1 to 10 % of scale amplitude                                                                          . Производитель: Crouzet. Сроки поставки 3-4 недели. Мин заказ 1 шт.		 Crouzet Заказать можно по тел.: (375) 29 640-15-23
Написав по e-mail: vasiliy.hotovchik@gmail.com
89422508 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD) Технические характеристики 89422508 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD): Supply 100 to 240 VAC
Frequency (Hz) 50 / 60
Tolerance -15 % +10 % Un
Consumption 5 VA
Display CTD 43 Measurement or setpoint : red LEDs, 3-digit, 7-segment, height 10 mm
Display CTH 47 / CTD 46 Measurement : red LEDs, 3-digit, 7-segment, height 10 mm
Setpoint : green LEDs, 3-digit, 7-segment, height 7,5 mm
Switch the configuration and calibration are accessed via an internal switch, which can only be accessed when the equipment is
disconnected
Insulation resistance conforming to IEC 348 > 100 MΩ
Insulation voltage according to IEC 348 1500 V
Immunity to interference conforming to IEC 801-4 Level 3
Immunity to interference conforming to IEC 801-2 8000 V
Accuracy ± 0.3 % of the full measurement scale at an ambient temperature of 25 oC at Un
Operating temperature range (°C) 0 →+50 °C
Storage temperature range (°C) -30 →+70 °C
Relative humidity (Rh no condensation) 20 →85 %
Housing material self-extinguishing UL94 VO grade
Front panel polycarbonate membrane
Protection class according to IEC 529 (IEC 70-1) IP 54
Connection screw terminals
Weight (g) 160
Approvals UL/CSA
Inputs
Thermocouples J, K, and N IEC 584-1
Thermocouples L DIN 43710
Reference junction Automatic cold junction compesation : 0 to 50 oC (Thermocouples)
Reference junction drift 0,1 °C / °C
Line resistance 100 Ω max
Calibration (IEC 584-1) IEC 584 — 1
Resist. temp. detector Pt 100 according to IEC 751 3-wire
Line resistance < 4 Ω
Input type and standard range TC L (0/800 °C) (0/999°F)
J (0/800 °C) (0/999°F)
K (0/999 °C) (0/999°F)
N (0/999 °C) (0/999°F)
Input types and standard rangeRTD Pt100 (-199/500 °C) (-19,9/99,9°F) (-199/999 °C)
Output
Type of output discontinuous
Action type CTH 46 heating-cooling
Action type CTD 43 — CTD 46 heating or cooling
Limitation of output power : SOFT-START- heat action adjustable from 0 to 100 %
Limitation of output power : SOFT-START-heat/cool
action adjustable from -100 to + 100 %
Main output changeover relay 3 A 250 V AC resistive
Main output—logic Max. load : 700 Ω
Level 0 : < 0,5 V DC
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
18/06/2013 www.crouzet.comLevel 1 :
14 V DC± 20 % @ 20 mA max
24 V DC± 20 % @ 1 mA max
Main output cycle time 1 s →200 s
Cool output CTH 46 only N/O-1 A contact, 250 V AC resistive
Alarm output CTD 43-CTD 46 only N/O-1 A contact, 250 V AC resistive
Control characteristics
Control algorithm PID with auto-tune and adaptive tune : SMART
Control type CTD 43 CTD 46 heating or cooling
Control type CTH 46 heating-cooling
Sampling time 500 ms
Proportional band Pb CTD 43 — CTD 46 1,0 % to 99,9 % of scale amplitude
Proportional band Pb CTH 46 1,5 % to 99,9 % of scale amplitude
Proportional band Pb
Note : if Pb = 0 % discrete action
Hysteresis (during discrete action) 0,1 % to 10 % of scale amplitude
Integral time ti
Note : if ti > 20 min 1 min 20 s to 20 min 0 s (10 s resolution)
Derivative time td.
Note : if td=0 1 s to 9 min 59 s
Cycle time heating 1 s →200 s
Cycle time cooling (CTH46 only) 1 s →200 s
Heat-cool control CTH 46
Cool proportional band rC x heat proportional band
Heat-cool control
rC : relative gain 0,20 →1,00
Heat-cool control CTH 46
dead.overlap band -20 % to + 50 % of the heat proportional band
Alarms (on CTD 43 and CTD 46 only)
Type of output direct or reverse
Functions absolute alarm
. band alarm
. deviation alarm
Reset to zero manual
Inhibition can be configured
Alarm threshold — absolute alarm absolute value independent from SP
Alarm threshold — band alarm value relative to SP, adjustable from 0 to 500 °C/°F
Alarm threshold — deviation alarm value relative to SP, adjustable from-199 °C/°F (negative deviation) to +500 °C/°F (positive deviation)
Alarm 0.1 to 10 % of scale amplitude                                                                          . Производитель: Crouzet. Сроки поставки 3-4 недели. Мин заказ 1 шт.		 Crouzet Заказать можно по тел.: (375) 29 640-15-23
Написав по e-mail: vasiliy.hotovchik@gmail.com
89422512 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD) Технические характеристики 89422512 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD): Supply 100 to 240 VAC
Frequency (Hz) 50 / 60
Tolerance -15 % +10 % Un
Consumption 5 VA
Display CTD 43 Measurement or setpoint : red LEDs, 3-digit, 7-segment, height 10 mm
Display CTH 47 / CTD 46 Measurement : red LEDs, 3-digit, 7-segment, height 10 mm
Setpoint : green LEDs, 3-digit, 7-segment, height 7,5 mm
Switch the configuration and calibration are accessed via an internal switch, which can only be accessed when the equipment is
disconnected
Insulation resistance conforming to IEC 348 > 100 MΩ
Insulation voltage according to IEC 348 1500 V
Immunity to interference conforming to IEC 801-4 Level 3
Immunity to interference conforming to IEC 801-2 8000 V
Accuracy ± 0.3 % of the full measurement scale at an ambient temperature of 25 oC at Un
Operating temperature range (°C) 0 →+50 °C
Storage temperature range (°C) -30 →+70 °C
Relative humidity (Rh no condensation) 20 →85 %
Housing material self-extinguishing UL94 VO grade
Front panel polycarbonate membrane
Protection class according to IEC 529 (IEC 70-1) IP 54
Connection screw terminals
Weight (g) 160
Approvals UL/CSA
Inputs
Thermocouples J, K, and N IEC 584-1
Thermocouples L DIN 43710
Reference junction Automatic cold junction compesation : 0 to 50 oC (Thermocouples)
Reference junction drift 0,1 °C / °C
Line resistance 100 Ω max
Calibration (IEC 584-1) IEC 584 — 1
Resist. temp. detector Pt 100 according to IEC 751 3-wire
Line resistance < 4 Ω
Input type and standard range TC L (0/800 °C) (0/999°F)
J (0/800 °C) (0/999°F)
K (0/999 °C) (0/999°F)
N (0/999 °C) (0/999°F)
Input types and standard rangeRTD Pt100 (-199/500 °C) (-19,9/99,9°F) (-199/999 °C)
Output
Type of output discontinuous
Action type CTH 46 heating-cooling
Action type CTD 43 — CTD 46 heating or cooling
Limitation of output power : SOFT-START- heat action adjustable from 0 to 100 %
Limitation of output power : SOFT-START-heat/cool
action adjustable from -100 to + 100 %
Main output changeover relay 3 A 250 V AC resistive
Main output—logic Max. load : 700 Ω
Level 0 : < 0,5 V DC
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
18/06/2013 www.crouzet.comLevel 1 :
14 V DC± 20 % @ 20 mA max
24 V DC± 20 % @ 1 mA max
Main output cycle time 1 s →200 s
Cool output CTH 46 only N/O-1 A contact, 250 V AC resistive
Alarm output CTD 43-CTD 46 only N/O-1 A contact, 250 V AC resistive
Control characteristics
Control algorithm PID with auto-tune and adaptive tune : SMART
Control type CTD 43 CTD 46 heating or cooling
Control type CTH 46 heating-cooling
Sampling time 500 ms
Proportional band Pb CTD 43 — CTD 46 1,0 % to 99,9 % of scale amplitude
Proportional band Pb CTH 46 1,5 % to 99,9 % of scale amplitude
Proportional band Pb
Note : if Pb = 0 % discrete action
Hysteresis (during discrete action) 0,1 % to 10 % of scale amplitude
Integral time ti
Note : if ti > 20 min 1 min 20 s to 20 min 0 s (10 s resolution)
Derivative time td.
Note : if td=0 1 s to 9 min 59 s
Cycle time heating 1 s →200 s
Cycle time cooling (CTH46 only) 1 s →200 s
Heat-cool control CTH 46
Cool proportional band rC x heat proportional band
Heat-cool control
rC : relative gain 0,20 →1,00
Heat-cool control CTH 46
dead.overlap band -20 % to + 50 % of the heat proportional band
Alarms (on CTD 43 and CTD 46 only)
Type of output direct or reverse
Functions absolute alarm
. band alarm
. deviation alarm
Reset to zero manual
Inhibition can be configured
Alarm threshold — absolute alarm absolute value independent from SP
Alarm threshold — band alarm value relative to SP, adjustable from 0 to 500 °C/°F
Alarm threshold — deviation alarm value relative to SP, adjustable from-199 °C/°F (negative deviation) to +500 °C/°F (positive deviation)
Alarm 0.1 to 10 % of scale amplitude                                                                            . Производитель: Crouzet. Сроки поставки 3-4 недели. Мин заказ 1 шт.		 Crouzet Заказать можно по тел.: (375) 29 640-15-23
Написав по e-mail: vasiliy.hotovchik@gmail.com
89422518 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD) Технические характеристики 89422518 Crouzet Терморегулятор (Цифровые контроллеры температуры CTH и CTD): Supply 100 to 240 VAC
Frequency (Hz) 50 / 60
Tolerance -15 % +10 % Un
Consumption 5 VA
Display CTD 43 Measurement or setpoint : red LEDs, 3-digit, 7-segment, height 10 mm
Display CTH 47 / CTD 46 Measurement : red LEDs, 3-digit, 7-segment, height 10 mm
Setpoint : green LEDs, 3-digit, 7-segment, height 7,5 mm
Switch the configuration and calibration are accessed via an internal switch, which can only be accessed when the equipment is
disconnected
Insulation resistance conforming to IEC 348 > 100 MΩ
Insulation voltage according to IEC 348 1500 V
Immunity to interference conforming to IEC 801-4 Level 3
Immunity to interference conforming to IEC 801-2 8000 V
Accuracy ± 0.3 % of the full measurement scale at an ambient temperature of 25 oC at Un
Operating temperature range (°C) 0 →+50 °C
Storage temperature range (°C) -30 →+70 °C
Relative humidity (Rh no condensation) 20 →85 %
Housing material self-extinguishing UL94 VO grade
Front panel polycarbonate membrane
Protection class according to IEC 529 (IEC 70-1) IP 54
Connection screw terminals
Weight (g) 160
Approvals UL/CSA
Inputs
Thermocouples J, K, and N IEC 584-1
Thermocouples L DIN 43710
Reference junction Automatic cold junction compesation : 0 to 50 oC (Thermocouples)
Reference junction drift 0,1 °C / °C
Line resistance 100 Ω max
Calibration (IEC 584-1) IEC 584 — 1
Resist. temp. detector Pt 100 according to IEC 751 3-wire
Line resistance < 4 Ω
Input type and standard range TC L (0/800 °C) (0/999°F)
J (0/800 °C) (0/999°F)
K (0/999 °C) (0/999°F)
N (0/999 °C) (0/999°F)
Input types and standard rangeRTD Pt100 (-199/500 °C) (-19,9/99,9°F) (-199/999 °C)
Output
Type of output discontinuous
Action type CTH 46 heating-cooling
Action type CTD 43 — CTD 46 heating or cooling
Limitation of output power : SOFT-START- heat action adjustable from 0 to 100 %
Limitation of output power : SOFT-START-heat/cool
action adjustable from -100 to + 100 %
Main output changeover relay 3 A 250 V AC resistive
Main output—logic Max. load : 700 Ω
Level 0 : < 0,5 V DC
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
18/06/2013 www.crouzet.comLevel 1 :
14 V DC± 20 % @ 20 mA max
24 V DC± 20 % @ 1 mA max
Main output cycle time 1 s →200 s
Cool output CTH 46 only N/O-1 A contact, 250 V AC resistive
Alarm output CTD 43-CTD 46 only N/O-1 A contact, 250 V AC resistive
Control characteristics
Control algorithm PID with auto-tune and adaptive tune : SMART
Control type CTD 43 CTD 46 heating or cooling
Control type CTH 46 heating-cooling
Sampling time 500 ms
Proportional band Pb CTD 43 — CTD 46 1,0 % to 99,9 % of scale amplitude
Proportional band Pb CTH 46 1,5 % to 99,9 % of scale amplitude
Proportional band Pb
Note : if Pb = 0 % discrete action
Hysteresis (during discrete action) 0,1 % to 10 % of scale amplitude
Integral time ti
Note : if ti > 20 min 1 min 20 s to 20 min 0 s (10 s resolution)
Derivative time td.
Note : if td=0 1 s to 9 min 59 s
Cycle time heating 1 s →200 s
Cycle time cooling (CTH46 only) 1 s →200 s
Heat-cool control CTH 46
Cool proportional band rC x heat proportional band
Heat-cool control
rC : relative gain 0,20 →1,00
Heat-cool control CTH 46
dead.overlap band -20 % to + 50 % of the heat proportional band
Alarms (on CTD 43 and CTD 46 only)
Type of output direct or reverse
Functions absolute alarm
. band alarm
. deviation alarm
Reset to zero manual
Inhibition can be configured
Alarm threshold — absolute alarm absolute value independent from SP
Alarm threshold — band alarm value relative to SP, adjustable from 0 to 500 °C/°F
Alarm threshold — deviation alarm value relative to SP, adjustable from-199 °C/°F (negative deviation) to +500 °C/°F (positive deviation)
Alarm 0.1 to 10 % of scale amplitude                                                                           . Производитель: Crouzet. Сроки поставки 3-4 недели. Мин заказ 1 шт.		 Crouzet Заказать можно по тел.: (375) 29 640-15-23
Написав по e-mail: vasiliy.hotovchik@gmail.com